MultiLNB Switch Setup DiSEqC Switch. This top level handles switching between the 2 groups of 4 ports on the switch. Tone Switches. The next level uses Tone (22kHz) switches to switch between paris. LNB Configuration. In a perfect world we would then be able to put the LNBs on the end.
![]()
Archived from groups: alt.video.satellite.mpeg-dvb (More info?)
My setup is a Twinhan 1020A card, MyTheatre 3.19, Space Star 4x1 diseqc 2.0 switch, and two separate 18' single-lnb dishes pointed at Echostar 5/8 and Echostar 7. I have 5/8 plugged into the lnb1 port and 7 plugged into the lnb2 port on the diseqc. My problem is that I'm not able to switch lnb's when changing channels from within MyTheatre. Echostar 7 channels are fine with the switch in place, but I can't get anything from 5/8 to come up. I have the diseqc settings at Committed LNB1 for Estar5/8 and Committed LNB2 for Estar7, with lof1 and 2 @ 11250000, and sw @ 0. When I plug directly into Estar5/8 with no switch, the channels come in fine, but I can never seem to access 5/8 with the switch in place, no matter what settings I make. Do I have this set wrong, or is it just a bad switch maybe? Any suggestions? ![]() Comments are closed.
|
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |